Function: Adopt the method of separating the cell string from the glass, and grab the cell string in the air, then to interconnected solder the head, middle and tail bus bar of the middle wire edition module at a certain height. It has the function of rolling bus belt supply, upward bending U, L-shaped lead wire and U, L-shaped bus end punching function.
The raw material specification
Cell specification:
Standard optional from 166/182/210 mm cell), the main busbar distance is provided by the customer.
(It can be upgraded to other different cell types with compensation. The change of the main busbar of the same size cell needs to be replaced, and the soldering head and base plate need to be replaced for other 156mm-170mm, 180mm, 185mm, 210mm batteries, and other hardware needs to be adjusted.)
Module specification:
A.156-18x cells:
6 strings * 10 half pieces * 2, 6 strings * 11 half pieces * 2, 6 strings * 12 half pieces * 2, 6 strings * 13 half pieces * 2, cell space - 0.5-4mm, string space 1-6mm;
B.210 cells:
6 strings * 10 half pieces * 2, 6 strings * 11 half pieces * 2, 6 strings * 15 one third pieces * 2, cell space - 0.5-4mm, string space 1-6mm;
C.210 cells:
5 strings * 10 half pieces * 2, 5 strings * 11 half pieces * 2, 5 strings * 15 one third pieces * 2, cell space - 0.5-4mm, string space 1-6mm;
D.220 cells:
6 strings * 10 half pieces * 2, 6 strings * 15 one third pieces * 2, cell space - 0.5-4mm, string space 1-6mm;
(bypass soldering function is optional, and the distance between bypass busbars is no less than 10 mm (4 mm busbars))
Glass specification:
width(980-1500mm)*length(1630-2600mm)
Busbar specification:
Bus bar is in roll feeding and automatic cutting, thickness 0.18-0.40mm, width 4,5,6,8mm, roller weight≤13Kg.
Main technical parameters:
(1)Cycle: 20s (no jumper version, primary calibration, including incoming and outgoing materials, transmission line glass exchange cycle of 3.5s/ block, thickness of convergence belt ≤ 0.35mm)
Cycle: 23S (jumper version, primary calibration, including incoming and outgoing materials, glass exchange beat of transmission line 3.5s/ block, thickness of convergence belt ≤ 0.35mm)
(2) Fragment rate :<0.2‰(as per pcs)
(3) Soldering method: electromagnetic
(4) Height of module in&out: 960±20mm
(5) Lead busbar angle and deviation:90° deviation 2~3°
(6) Post soldering tensile force ≥ 5N / mm (spraying flux)
(7) The maximum allowable deviation of component inflow: glass center deviation < 30mm
(8) Overall yield ≥ 99% (according to the unit, the typesetting accuracy of components flowing into the busbar soldering machine should be within ± 0.5mm, and the standard of multi main grids is the same)
(9) Maintenance rate ≥ 98.5%
(10) The accuracy of secondary string arrangement is ± 0.25mm
(11) The assembly line in front of the soldering machine must have the function of normalization
(12) The overlap area of bus bar ≥80%, and the deviation is within ± 1 mm
(13) Overlap deviation of bypass bus belt: ± 1mm
(14) The maximum allowable deviation of component inflow: glass center deviation < 30mm
(15) The soldering tension of bypass busbar belt, 4 * 4 area ≥ 20N, 4 * 6 area is ≥ 25N, 6 * 6 area is ≥ 30N (spraying flux)
Audited Supplier 
){kind=link}
){kind=link}