100MW Full Auto Solar Panel Production Line Solar Panel Making Machines

• Customization: Available
• Production Scope: Product Line
• Automation: Auto or Semiauto
• Model NO.: Ooitech
• After-sales Service: Professional
• Warranty: 1 Year
• Transmission Type: Flexible
• Automatic Production Line: Comprehensive
• Certification: CE
• Flexible Production: Intelligent Manufacturing
• Rhythm: Flow Production Line
• Transport Package: Sea Freight
• Specification: 100MW Full Automatic Solar Panel Making Machines
• Trademark: Ooitech
• Origin: China
• Production Capacity: 100MW/Year

Product Description

100MW Full Auto Solar Panel Production Line Solar Panel Making Machines

How to build a solar plant? Many customers have this idea, but they don't know what machine they need, so the project did not start.

So, What Machines are Included in 100MW Full Auto Solar Panel Production Line Solar Panel Making Machines

1. Factory Layout Drawing:

2. How To Make 100MW Full Auto Solar Panel Production Line Solar Panel Making Machines:

Step 1: Test solar cell efficiency: make sure the same power cell to be used in one solar panel;

Step 2: Cut complete solar cell into small pieces;

Step 3: Welding solar cell: welding solar cell to string solar cell;

Step 4: Cutting EVA/TPT: according to the solar panel size to cut the EVA and TPT in the designed size;

Step 5: Lay up: achieve solar string automatic laying on glass EVA, and transporting module to the next process;

Step 6: Visual inspect: check the dirty for the Raw materials;

Step 7: Defect check: uses the EL tester machine to identifying micro-cracks, broken   finger wires, and other invisible defects in solar modules;

Step 8: Lamination: after EL tester checking the defects,  use solar panel Laminate the raw material into solar panel;

Step 9: Trimming: when the Solar panel get cooling after coming out from laminator,  It need Cutting the edges,  we call Trimming;

Step 10: Glue: use sealant to glue up on aluminum frame;

Step 11: Framing: use the framing machine to install the aluminum frame;

Step 12: Glue: fill the sealant to aluminum alloy after framing;

Step 13: Install junction box: glue the junction box and install it on the solar panel;

Step 14: IV Test: use solar simulator to test the finished solar panel Electrical performance test like power, current etc and record;

Step 15: Test the panel withstand voltage insulation;

Step 16: Defect check: uses the EL tester machine to identifying micro-cracks, broken finger wires and other invisible defects of finished solar modules;

Step 17: Label;

Step 18: Clean the surface and package.

3. Function & Picture of Main Machines of Full Auto Solar Panel Production Line Solar Panel Making Machines:

· Solar Cell Power Tester

Function: 
Solar cell power tester is usded to test the electrical performance of Mono-Si or Poly-Si solar cell pieces and record the results in files.
Picture:   

· Solar Cell Laser Cutting Machine

Function: 
Solar cell laser cutting machine cuts solar cell into half piece or 1/3 piece,which can increase the output of the solar panel power.
Solar cell laser cutting machine is with lower power, lower temperature, and water-free dicing, and also has higher bending strength, better electrical performance, and no secondary pollution or water-caused micro-broken after cutting.
Picture:

· Solar Stringer Machine

Function:  
Solar stringer machine is to weld the solar cells one by one through copper ribbon, and the cells are connected in series to form a string. The entire welding process is fully automated.

Picture:

· Solar String Lay Up Machine

Function:  

Used to achieving solar string automatic laying on glass EVA, and transporting module to the next process

Picture:

· Automatic Solar Cell String Bussing Machine

Function:  

Adopt the method of separating the cell string from the glass, and grab the cell string in the air, then to interconnected solder the head, middle and tail bus bar of the middle wire edition module at a certain height; It has the function of a roll feeding bus bar, bending U and L leads upwards.

Picture:

· Solar EL Tester

Function:  
Solar EL tester is used in testing the solar cell crack, breakage, black spot, mixed wafers, process defect, cold solder joint phenomenon.

Picture:

· Solar Laminator

Function:  

Solar panel laminator is a mechanical device that presses multiple layers of materials together.

Picture:

·Solar Framing Machine

Function:  

Automatic gluing & framing machine is used to install the aluminum frame and automatically overflow glue.

Picture:

· IV Tester

Function:

IV tester is used to test the electric performance of Mono-Si or Poly-Si solar modules and record the results in files .

Picture:

3. Case of 100MW Full Auto Solar Panel Production Line Solar Panel Making Machines:

4. Three reasons to choose us:

.Engaged in overseas sales for more than ten years

.High-quality equipments

.Professional after-sales service team